I bought a set of yamaha rims to replace the purple ones on the blaster i am rebuilding. the new front rims fit the current lug pattern but the rear ones dont fit. The old rims were 8 inch and the new rims are 9 inch. My question is: Can you get a different rear wheel hub that will fit the bigger wheels or am i FUBAR? It look like the patter on the hew rims is about an inch wider than the original. Any help would be greatly appriciated.
Rear lug pattern
- Thread starter Austin Blaster
- Start date
you would have to know what that rims is set up for..
you can use banshee or raptor hubs. but i dont know what the offset of your rims is.
you can use banshee or raptor hubs. but i dont know what the offset of your rims is.
Sounds like you need banshee hubs. I believe yfz450 hubs would fit too because i heard they fit banshees.
YFZ hubs will fit. I'm using Lonestar YFZ hubs to get a honda pattern. Measure diagonally from the center of one bolt hole to another. Yamaha pattern (4/115) will be about 4.5" Honda pattern (4/110) will be about 4.375"
Similar threads
