So I have a 2001 blaster and I have a hydro kit but the caliper is pitted so it leaks and won't hold the pressure to work correctly. What is the best option to get a new caliper or a new complete set to start fresh. ? Also is there another quad that I can pull from or get to replace it that may help save some money. ? Let me know guys thanks!!
Rear brakes 2001blaster
- Thread starter rallycar01
- Start date
Most Yamaha sport quads use similar calipers on the front. I would imagine the rears wouldn't be much different.
Depends on what rear caliper you have... If it's an 03+ blaster carrier and axle, pretty much any sport quad rear caliper will work (honda's, zuke's, and yammy's, OH MY)
If it's a rear caliper kit from blasterzone, project blaster, or trenga racing, then you have to purchase a caliper rebuild from them.
Pictures of your rear hydro caliper will help determine what's needed.
If it's a rear caliper kit from blasterzone, project blaster, or trenga racing, then you have to purchase a caliper rebuild from them.
Pictures of your rear hydro caliper will help determine what's needed.
Well it is a trends racing caliper however when I reached them they are out of business so there is nothing I can do about that. That's what the guy said when he answered the phone. But I have a 2001 They had cable for OEM when I bought the quad this kit was already installed. So what should I do. The system works but the caliper doesn't cuz it's pitted inside the base walls around the edge. There isn't a seal that can take care of that. Options and opinions on what to do? Thanks !!
Similar threads
