quick after market swingarm Question??

[speedracinshift]

the swing arm is a 6 over its the one in the pic on the right. i wanna know if it will work on a blaster if i was to cut out the middle of the top bearing tube to fit around the motor if it would fit? this is off of a banshee looks like the one for a blaster ecept the middle tube is not cut out for the motor. what type of shock would i need to thanks.

 

[blasterdude14]

never heard of a banshee swinger used on a blaster, i guess with some modding to it, it would work.
banshees use a dogbone link for the rear shock so i imagine that you would need one of those

 

[Blasterb0y794]

Spelling, punctuation, and periods. Not sounds like anyones mother but it would help. Give it shot a let us know how it turns out.

 

[phragle]

the swing arm is a 6 over its the one in the pic on the right. i wanna know if it will work on a blaster if i was to cut out the middle of the top bearing tube to fit around the motor if it would fit? this is off of a banshee looks like the one for a blaster ecept the middle tube is not cut out for the motor. what type of shock would i need to thanks.

If you have a welder, a mill, a lathe and band saw, anythings possible. Other than that , don't woute me but I think the banshee is narrower

 

[DirtDiggler]

very doable , is the bolt and bearings the same size as the blaster? if so then a quick measurement from the outside ends of the mounting tube . as far as the shock mount , you could fab up a extension for the mount on it . Like the man said , anything is possible

 

[speedracinshift]

thanks guys for the input i think that i am just ganna save the money and buy one thats made for the blaster. bc the guy wants 90$ for this one so i will just put my money to one thats made to fit all ready since i dont feel like screwn with this one thanks agian.

 

[NOVIS]

If you have a welder, a mill, a lathe and band saw, anythings possible. Other than that , don't woute me but I think the banshee is narrower

but if u got all that u might as well extend the stock one and save money.

 

[speedracinshift]

i got a welder, grinders, chop saws, no lathe or mill tho. plus i am ganna hold of since i am ganna try to pic up a nother bike to build the crap out of it since i got a 240 kit lay here i cant justify puting it on this one since i just built this motor from top to bottom. it also not even broke in yet.

 

[phragle]

i got a welder, grinders, chop saws, no lathe or mill tho. plus i am ganna hold of since i am ganna try to pic up a nother bike to build the crap out of it since i got a 240 kit lay here i cant justify puting it on this one since i just built this motor from top to bottom. it also not even broke in yet.

You didnt mention that in the pm.. Im not sure if the blasteran banshee pivot bolt are the same size, I think they are, but not 100% sure.. if they are and you are CAREFUL in making sure you get EVERYTHING dead nuts straight you can cut out the center supports and weld in new ones effectively making the swingarm wider.