PWK 28 needle for 240

[pittss1c]

I did some searching and sifted through a lot of messages, but can not find a range of what people use. I have a vito's 240 blaster with a PWK 28 carb.
The problem is that I have to put the clip all the way at the top to get it to stop burbling on it's way to the power band. (seems wrong) The needle that is in there has no markings on it. For fun, I compared it to the needles in my banshee which are JJH. The blaster needle is much longer and tapers to a smaller diameter at the end. Interesting enough, if I line up the middle clip position of the JJH with the top clip position on the one that is in there, there profile is very similar. (with the blaster needle being longer and continuing to get smaller after the JJH ends)

Can anyone here with a PWK 28 tell me which needle they use?

 

[ClimbAnyHill]

Sounds like you have a rich needle. Give that JJH a try.
I tried it from my Banshee to Blaster with same PWK carb and rev's out really good.

 

[pittss1c]

I guess that is why I am curious what others use... I know that CGL is common on Banshees

 

[ClimbAnyHill]

I guess that is why I am curious what others use... I know that CGL is common on Banshees

My Banshee hated the CGL.. Recently made huge changes on the Banshee though so let's see what kinda jetting she prefers this time around.

 

[pittss1c]

As expected, the JJH with the clip in the #3 behaved much like the one that was in there in the #1 slot. The only unknown is weather I should buy a JJH or I think N68A is the other one I have heard of on PWK 28s