project blaster

[blasters/banshees]

well that banshee I was going to buy got sold on me so I bn kick around this idea for a long time and I think its time to do it heres the list of this blaster even thought your only using a frame
1.Get frame powdercoated orange
2. drop a yz400 liqued cooled motor in there, bore it out get a really nice crome pipe and silencer and crome out the motor
3.Get +3 aarms in the front and a +6 daimod j kit and then some 18in or 19in elka shocks then in the back a +5 axle with +3 wheel spacers a elka shock to
4.Then on some black itps and itp whole shot tires
5. Then raptor 250 se plastics everything even the front and the gas tank and seat and rear plastic,head lights also with orange bulbs in them there going to run of a batteir like that raptor 250 and the rear led light
6. a racing stering stem the big one with pro taper bars and a racing kill switch.
7. Put on some hydros from a 06 blaster.

 

[darealblaster]

good dea i say,big project

 

[blasters/banshees]

does anyone no if it would be hard to mount the gas tank of a raptor 250 onto the blaster frame, also what is the color of the frame I no orange but what shade or type

 

[tjsdaname]

if you got +3 a-arms and a diamond j kit it would be wider than a car!!!!!

 

[djack12]

dont get that widening kit and a-arms. just buy +5 arms.

 

[blaster01]

yea thats what i was also thinkin DJACK

 

[blasters/banshees]

it would be as wide as a ktm or alittle wider then a yfz

 

[blasters/banshees]

also the raptor plastics thats my bigest fear off puting on becuase im going to order all the stuff new and make them fit and look just like a raptor 250 se

 

[specialized7]

meh i wouldn't sweat the plastics, they bend,cut easy, where as doing a swap is a little more work

 

[blasters/banshees]

but how do you think the front is going to fit also the funny part is im make in look like a se and im even puting the 250 grahics on so it will trick a lot of pepole lets say I modifided big time the blasty motor what class would it run in 450s

 

[tjsdaname]

it would be as wide as a ktm or alittle wider then a yfz

hahaha no.......

a stock yfz is 48inches and a blaster is 43inches and 43 + 12 is 55
and if you are gonna race the width limit is 50inches

 

[blaster195]

it would be hella hard to turn with it that wide you would want ummmm power steering (the older i get the more i forget stuff lol)

 

[blasters/banshees]

hahaha no.......

a stock yfz is 48inches and a blaster is 43inches and 43 + 12 is 55
and if you are gonna race the width limit is 50inches

ooo lol hahh never mind im just going to do a dj kit is there a lowering kit for the blaster

 

[blasters/banshees]

now look at a raptor 350 closely I think its really hard to mount the raptor 250 plastics and seat on and everything

 

[blasters/banshees]

Okay I really new more input on this does everyone think I can fit raptor 250 plastics on and actual make it look like a raptor 250 + can I get some pics of the mounting areas on a raptor 250 and a measurement of the gas tanks with

 

[Braapbraap95]

why don't you find a raptor 250 with a blown motor, then do this? You won't need to worry about fabbing the plastics, or the hydro brakes.

 

[blasters/banshees]

yea but cant I just get hydros from a 03+ blaster. Also someone with a raptor 250 can you please get pics of where the plastics mount and some measurements

 

[blasterrider119]

do it will be fukn sick

 

[blasters/banshees]

now isnstead of diffrent motor im just going to go with ct racings kit the 1500$ one can someone with a raptor 250 help me out I need mesurements of the gas tank