ok so i ust sold my blaster last week to get some money to buy a truck. now my buddy is asking if i want to buy his 02 warrior for 700 bucks it runs fine the only problem is the a arm is a little bent and the tie rod end snapped but i have a new 1. how hard do you think it would be to flip it and make some money?
possible flip??
- Thread starter falandys1002
- Start date
I used to flip stuff in the 1000 dollar area and theres not really any money it it. Sure you can make a couple of hundred here and there but you gotta go big if you want to make some cash.
I bought a 06 ltr450 for 1300 bucks just needed a new crank. had 1800 in it with crank and gaskets and misc stuff got 3600 for it. double profit.
Now I have anther 05 yfz450 bought it for 1300 had a bad piston and cylinder. Got a 478 big bore kit and gasket set for 400, i have about 1800 in it as well. Should get high 2grand for it when done.
An a arm and tie rod arent that much if you get them on ebay.
I bought a 06 ltr450 for 1300 bucks just needed a new crank. had 1800 in it with crank and gaskets and misc stuff got 3600 for it. double profit.
Now I have anther 05 yfz450 bought it for 1300 had a bad piston and cylinder. Got a 478 big bore kit and gasket set for 400, i have about 1800 in it as well. Should get high 2grand for it when done.
An a arm and tie rod arent that much if you get them on ebay.
i have the tie rod and the a arm can be bent back its just the fact that im gettin my licence in 2 months and dont have a truck yet
