Please help me?=(

[Lochner27]

I was messing with my mid 90's blaster and i took off the whole right side of the motor off. and all the fluid ran out of it. So i put it back on. well i have a blown engine also. so my whole top end is off too. Well, now my kick start doesnt have recoil?is there a spring? please help?

I dont know what to put back in the engine either.
YamaLube
4cycle engine oil
SAE 20w-40/api SJ

Is that what i put back into it?

PLease reply. i have a feeling i just Flucked myslef over.X(

 

[4cfed]

the kicker should have a spring to return it... and for fluid you any good oil for a wet clutch

 

[timsyfz]

The kickstart spring hooks into a little hole at about 1 o clock position (ish) Its sort of a nuisance to put back in, but after you get it it carefully put the cover back on (probably best to replace the gasket too to). The cover has a tab that holds that spring in place.

As for oil there are all sorts of options we chose Belray gearlube for our based on recommendations off here

 

[Lochner27]

The kickstart spring hooks into a little hole at about 1 o clock position (ish) Its sort of a nuisance to put back in, but after you get it it carefully put the cover back on (probably best to replace the gasket too to). The cover has a tab that holds that spring in place.

As for oil there are all sorts of options we chose Belray gearlube for our based on recommendations off here

ok, i own a yfz 450 so im kinda just messing around with my blaster. But im clueless on working on these things.

Do i use like an entire quart in the hole on top? i completly removed my oil injection. i mix the gas. But yeah, how much do i put into it?
Thank you. Very much

 

[timsyfz]

650ml is what it takes.. It should be stamped into the side cover as well