Please help me out??

[blaster99]

ok is there ANY way to remove the flywheel without the puller?THX

 

[BrokenBlazer]

Yea but I wouldnt recomend it. You can pry on the flywheel against the case, then hit the bolt with a hammer. Be careful tho, I mushroomed the head so bad I had to cut a 1/2" off the bolt, then file the threads just to get the nut started. Now the bolt is barely long enough for the nut to thread on. I would spend the $20 and wait a couple days, I wish I would of.

 

[militaryblaster]

Yeah, dont attempt that without a puller!

 

[daniel3877]

SPEND THE $10 ON A PULLER...i tryed to do it without the puller one time on a honda i owned, i used a prybar and tried tapping the bolt in the middle, as i was prying on it the bar broke off a big piece off the corner of the case ! i was super pissed but it was my own damn fault,I had to use liquid metel to fix it and it looked super cobbed ! I should have waited for a puller but i was impatient.
ever since then i wont make that mistake again.

flywheel puller
Item number: 200256535526
http://cgi.ebay.com/ebaymotors/VITO...535526QQptZMotorsQ5fATVQ5fPartsQ5fAccessories

 

[xjma]

Buying the puller is going to be much less expensive than what you may have to repair if you try to get it off without!!!

If you really don't want to, bring the motor to a cool shop and ask them to just pull it for you. Back when I was a youngin, that worked for me!! If you bought the thing at a stealership, they should hook you up for free if you just need that part pulled off!! Or if you buy parts there. Connections man, connections.

 

[89custom]

ah any shop would be like sure, if they had the time at that moment.

 

[ruthless_one3k]

By now I would think you would have gotten the point but just in case let me say it one more time Just buy the puller!!! or you will regret it in the long run

 

[militaryblaster]

Did u ever get the puller?

 

[blaster99]

yea i got it lol,thx for the help