PJ34 Jetting

[nofxfan125]

So I just had my cylinder bored, and put it back together. I found that I've had airleaks all along, so I know my jetting is thrown way off. What is a good baseline jetting to start with, looking in my signature at my mods? My elevation is 1900 feet. Even better yet, can someone just tell me what jets come with the PJ34 from Vito's? My current jets are HUGE at 170 main and 65 pilot. Thanks in advance.

 

[brandoz28]

i'd run it there and see how it is, then make jetting adjustments from there.

 

[nofxfan125]

By the way. sorry for a jet question. I know it's been beat to death.

 

[brandoz28]

i'm gonna bet you need to go down on the pilot, but the main is probably not that far off

 

[royalt67]

I currently have 170, 65, and yeah it may be a little big. I am going down to 160, 55, I think.

Standard jetting for a PJ34 is #152, #55, 48CEG needle, #6.0 slide. I have heard that Vito's supplies theirs with a DGH needle. That is what I currently have too.

 

[nofxfan125]

Thanks for the info man. Anyone else?

 

[Kgibson]

I think royalt is close, but alittle rich :} so I would start there and work my way down