B Blaster crazy Member Dec 17, 2015 572 66 64 Jan 23, 2016 #1 Hey guys if if sand down this grove u think this piston will be usable Attachments image.jpeg 623.9 KB · Views: 127
Awk08 Administrator Staff member Technician Jan 30, 2009 24,427 2,295 175 Usa Jan 23, 2016 #2 this isn't a serious question is it ? Reactions: Meyers and Larry's Shee
B Blaster crazy Member Dec 17, 2015 572 66 64 Jan 23, 2016 #3 Lol ur right really should replace Reactions: jus_me
jus_me Active Member Aug 8, 2012 3,594 517 177 N.Y Jan 23, 2016 #4 Save yourself some time, $ , and a headache and make sure you measure the bore and that it is still within spec. The last thing you want is to put a new piston in a worn out bore only to have to do it all over again.
Save yourself some time, $ , and a headache and make sure you measure the bore and that it is still within spec. The last thing you want is to put a new piston in a worn out bore only to have to do it all over again.
Blaaster Moderator Staff member Technician Jul 18, 2011 15,384 1,121 165 eastern australia Jan 24, 2016 #5 The piston is perfectly usable! Sand down the groove and polish the piston, give it a coat of clear varnish, and use it as an ashtray. Reactions: Meyers, joeak47, 1984cr500owner and 1 other person
The piston is perfectly usable! Sand down the groove and polish the piston, give it a coat of clear varnish, and use it as an ashtray.
joeak47 Active Member Apr 21, 2012 1,544 379 125 Northern NEVADA! Jan 25, 2016 #6 Now THAT'S funny!!! /\ /\ /\ Reactions: Blaaster