part check....warrior/shee/ calipers

[Mborso1029]

after powdercoating and rebuilding front calipers from a banshee....i lost the rubber plug that goes on the backside of it to stop debris and water from gettting into the bracket slide pins. i had them in a bag with the old seals and i think one of the porters at work might have thrown them away. anyone ever buy these? i cannot find them on any of the shee or warrior micro fisches.

 

[DirtDiggler]

i bet you could make one , or something similar . what about a dab of silicone ? or make one out of silicone , let it dry , then press it in ? something along those lines should work .

 

[Awk08]

i checked on bikebandit.com, and your right it dors not show that part, but may be included in the seal kit ????
#12 in the parts list on this page.......................
2001 Yamaha BANSHEE / YFZ350N OEM Parts, 2001 Yamaha BANSHEE / YFZ350N OEM Motorcycle Parts - BikeBandit.com
you may be able to call and see???
and i also have a junk set of j-arm calipers at home, i'm at my girls for the evening, but can see if they have the dust caps in them, if so, there yours...free of charge, cant let such nice lookin work go capless, i'll check tomorrow after work and let ya know

 

[Mborso1029]

wow that would be great, id love to give you a few bucks for the trouble though. and i alredy had purchased the seal kit when rebuilding...that came with like bleeder valve, valve cover and square cut oring seals

 

[MINIGfather]

anyway you could possibly find a piece of rubber hose from an autoparts store that is the the right diameter and put a bolt in the end of it for now or silicone the hole shut??

 

[Mborso1029]

ya im gonna give something like that a try but, thats gonna be a very very last resort, if absoloutly impossible to find. looks like awk my be helpin me out big time though