I have a 2006 with a shearer pipe, vforce 3 and 30mm OKO pwk type carb. Does anyone have any idea where I should start with the jetting. I was thinking 140 main but have no idea what to do with the slow jet. Any help would be great. Thanks
Oko Carb Jetting Question
- Thread starter zgjttgd
- Start date
i just got the same carb the pilot jet was just right for my setup i believe the pilot was a 30 or 35 cant remember for sure
i am not sure but your main sounds a small to me (but i do not have a 30mm oko). be careful when you do your plug chops because if you are too lean you will sieze your engine.
the oko carbs use the same jets as a keihin jetsrus.com has good prices an fast shipping if you need some more jets
