No Start or spark

[retrosns]

WTF!!! I am pissed. Just got my cylinder back from the shop bored .080 and head milled .020 I was able to kick it over a couple of times and it would idle then die after 2 or 3 secs then took carb off and cleaned it and now there is no spark. I have no wires on the handle bars to my throttle(twist throttle) however there are still wires coming out of the top of the carb(i assume TORS) is this a possibility it is f*cking up the system? I tried kicking it with it simoply unplugged with no success...Any help before I start drinking again...Maybe that's the problem...I wasn't drinking when I put things back together...lol

 

[ron89]

did u unplug the wire from the box thing under the grill? ..

 

[retrosns]

POS TORS

Both....BTW that's what it was...Got it running however now it is idling high as hell and then kinda bogs...then dies...then doesn't fire for a few moments....As if that is not enough it is running hot....This is a spare bike so I want to take both of mine out with me...Crazy sh*t happens when you start drinking...lol

 

[ron89]

did u try removing the air box lid see if that helps any and if its off try and put it back on and try and run it .. how does your plug look ??..

 

[retrosns]

damn it

Plug looks good since I didn't run it hard...I will try to put the airbox lid back on....Thanks for the help...I appreciate...But now I don't have a reason to drink as much...

 

[ron89]

np man .. hah yeaa drinking and working on quads dont work out so well some times lol .. yeaa give that a try see if it helps ..

 

[retrosns]

Of course now I think I may have to get a new carb...Bigger...or re-jet...This thing will only run with the choke on If I turn the choke off it bogs unless sometimes you can feather the throttle when you try to put the gas to her

 

[ron89]

hmm.. i would say up the pilot jet or try mving the needle clips down 1 see if that helps..
did u try cleaning yourcarb ??..

 

[retrosns]

Don't matter I gotta put crank bearings in it now...The crank is hitting the case

 

[ron89]

Don't matter I gotta put crank bearings in it now...The crank is hitting the case

dam that sux .. i see u have a 4mm crank did u have the case cut so it wouldn't hit jw?..

 

[retrosns]

No this is another blaster...That one runs un- f*cking believable....The one in question I just picked up for 50.00 sunk a couple hundred in it and now the rod is hitting the bottom and front of the crankcase

 

[blasterboy91]

is the one thats having the problem with the crank stock????cuz if it is stock then you gotta bigger problem then jus the crank...

 

[retrosns]

This is GINSU commercial...But wait there's more!

Yeah go figure...It looks like it is stock...I don't know what would cause this thing to act like such an ass...I paid 200 for my last crank ....All I did was "hold it and hug it and love it and call it george" lmao...I really don't want to take it to my friends shop and have him do everything...The only way to learn is experience! And you're never too old to learn...There is something to say about people who do their own work