new top end. how do u break the motor in properly?

[blasterboy 2000]

i'd start at a prolly very rich 290, you'll prolly end up around 260/270
where you located....elevation ???? < thats why nobody can tell you for sure

i live in monroe michigan. elevation i dont know what it is. and i forgot that i have a k&n air filter.

 

[Awk08]

i live in monroe michigan. elevation i dont know what it is. and i forgot that i have a k&n air filter.

googled your towns elevation........594 ft. above sea level

thats pretty low, which equals a larger jet than i would require here at 1800-2500 ft.

start around 290/300, that'll be rich
stock pilot, airscrew at 1 1/2 turns out, needle clip in the middle

 

[blasterboy 2000]

googled your towns elevation........594 ft. above sea level

thats pretty low, which equals a larger jet than i would require here at 1800-2500 ft.

start around 290/300, that'll be rich
stock pilot, airscrew at 1 1/2 turns out, needle clip in the middle

ahhh ok i will start at a 290 and run it and the do what u said about the change the plug and go 5th gear and cost and do plug chops and see

 

[Awk08]

ahhh ok i will start at a 290 and run it and the do what u said about the change the plug and go 5th gear and cost and do plug chops and see

read all of them articles !!!!!!!!!!!!!!!!!

 

[blasterboy 2000]

read all of them articles !!!!!!!!!!!!!!!!!

i did. i will reread them though.