new problem-o with ALL brakes

[jahrastapark]

bled both front and back prior and after. put new pads in the back, and they arent fitting. ***part #(1uy-w0047-50)***** along with caliper seals. i have no suction in the rear brake resevoir, absolutely no pressure on the pedal. as for the front, i had pressure. and then bled em, now i have ZERO pressure. i have no idea whats going on. i have no leaks, or breaks in the line. someone please lend some advice please

 

[1997blaster]

i have a 1997 so no advise but that sux bro hopefully someone can help you

 

[hvacdude]

do you have the brake fluid full ?

 

[Ready2rev]

you need to make sure that your filling your brake fluid while you are bleeding them or you will have air in the system which the brakes will not operate. check your brake lines too.

 

[jahrastapark]

i bought new fluid yesterday. belray dot 4 fluid.i filled the front brake fluid resevoir then bled em. i noticed very small air bubbles in the resevoir floating up, but they arent stoppiing. ddnt look at it today, mucho rain. any input on why there is no suction in the rear brake resevoir??

 

[Ready2rev]

did you look for any leaks?

 

[DUALSTROKE]

It can be a pain in the ass to bleed these sometimes.I went to auto zone and gave them $25 or so and borrowed the gun that is made to bleed brakes.It's a little gun style deal that sucks the air through and has a check valve in it to stop any air from coming in.When your done return it for your money back.I tried for hours to bleed mine and that tool did it in 3 minutes.They also sell them for $30-35 at auto zone.Any big name parts store should rent this tool.