new a pros opinion

88' blaster

88' blaster

New Member
Sep 18, 2010
1,859
22
0
new castle pa
i have been thing about the ninja blaster alot. im going to make it a show/dragger. i really like the drag style round front mounted gas tanks but the problem i see with this tank and the rad i will have is how can i get the fuel and coolant up to the motor. small fuel pumps? need a little help please
 
For fuel a sno-mo pump with a vacume port plumbed into intake. For cooling, doesn't it have pump on motor? I do believe no matter what the rad cap has to be higest point of system.
 
You talking 250 or 500? Not familar with either, didn't know they might have electric water pump. If it's fuel injected you'll need the ninja pump, sno-mo wouldn't be enough pressure
 
Seems I just saw a thread about a Ninja/Blaster build, cool. Ya, a good sno-mo pump will do the trick. Be sure it has one inlet and two out. Pretty sure pump has to be lower than tank. Have to find a nipple to go into intake between carb and head.
 
Larry's Shee said:
Seems I just saw a thread about a Ninja/Blaster build, cool. Ya, a good sno-mo pump will do the trick. Be sure it has one inlet and two out. Pretty sure pump has to be lower than tank. Have to find a nipple to go into intake between carb and head.
Click to expand...

prob mine. lol and is that a brand or type or what. a snowmobile pump?
 
You must log in or register to reply here.

Similar threads

Bent Wheels Mx
Gncc style yz 250 blaster?
Replies
6
Views
440
Full Rebuilds
Bent Wheels Mx
Bent Wheels Mx
S
Won’t start
Replies
4
Views
853
Engine
Stan02895
S
Blaster_boy200
A technical question about the choke?
Replies
2
Views
873
Carburetor
Blaster_boy200
Blaster_boy200
M
Uni pod filter w/ no airbox causing problems?
Replies
0
Views
842
Jetting
MrBank
M
BlasterOrDeath
Seized 3 new pistons. 1 old one
Replies
5
Views
2K
General Support
BlasterOrDeath
BlasterOrDeath
Top Bottom
Back