neutral???

[i e toto]

hey wats up guys, im new to the forum and i just good my new blaster but when its off i can get it into neutral with no problem but when its running i get it into neutral rarely and my trany is in good condition can some one tell me wats up wit that?

 

[yb200]

they can be a little tricky sometimes

 

[blasters/banshees]

I think all blasters and banshees are like that there a pain ivv owned 3 blasters and my freinds banshee and it does this

 

[4cfed]

i have no problem gettin mine in nuetral... 99% of the time when you can hit nuetral off but not running, the clutch is dragging/ out of adjustment.

 

[Brainmatter]

^^^ What he said. Your clutch is probably dragging. Also,try a different oil if you continue to have this problem.. sometimes if your using just plain old automotive oil the cluch can draga ittle more. You'll probably always have this issue when the bike is cold though, after it warms up you should be good. If none of that works, just try blipping the throttle while puling up into 'N'

 

[4cfed]

^^^ What he said. Your clutch is probably dragging. Also,try a different oil if you continue to have this problem.. sometimes if your using just plain old automotive oil the cluch can draga ittle more. You'll probably always have this issue when the bike is cold though, after it warms up you should be good. If none of that works, just try blipping the throttle while puling up into 'N'

NEVER EVER EVER EVER run automotive oil in your trans.. unless you wanna turn your clutch friction plates to junk in no time!!! trust me i learned the hard way.... try running a lighter oil also..to thick of oil wil cause it to drag....

also sittin for a long time will do this... wifes 300ex sat for 6-7 months before we bought it .. took a good hour of riding for them to stop stickin

 

[i e toto]

thanks guys i appreciate it