how do you guys get the nut on your nerf bars off? the retard that put mine on be i bought it put the nuts on top instead of bottom! 8-| and i cant get it off because none of my wrenches or tools fit in there
nerf bar nuts? HELP!
- Thread starter mystic mafia
- Start date
mine are on top too. i just used a wrench in a weird position to get em tight so might work the same way.if that dont work maybe try visegrips,and penatrating oil.
if they are u bolts when you loosen the outside nut, it will take the pressure of so you can slide it out a bit and even turn it some for easy access. thats how i put mine on and how ill take them off if/when i do. I:I
those are the pics but it is the nut behind it and it won't even move when i do what nightsterman said. and no needle nose plyer will fit in there. i got the other one out with my hand but this one wont budge. and my " U " clips wont fit in the other way. like this ^ . but it does fit like this U and it is so fustrating because it makes the boltsso hard to get off
loosen/ take off the outside nut, then it should wooble around enough that you can get to the inside one.
if you take the outside nut off you should have enough wiggle room to get a wrench on it, PB Blaster may help. If you cant get it to wiggle enough to get a wrench on it, cut em off, those little ubolts are pretty cheap.
first, get a really big hammer, next..................
than i go and hit my crappy mechanical rear brakes with it! they suck! stoppies for life!
couldn't you get everything else loose and slide it forward to get more clearence for a wrench seems like it might work just a thought
Ya .05 is 5/100 but i wanted .5/100 which is .005
.5% is .005
if you don't believe me google "what is .5%"
1/2 is 50/100 which is .5 but not .5% its 50%
I think you are forgetting the x10 step
100% =1.0 so 50% =.5 so .05 = 5% so .005 =1/2 a percent
Don't correct someone incorrectly I:I
Ya you can I have the same gay nerf setup they are a pain in the ass but you take off peg bolts, loosen the u-bolt nuts you can get to then slide them forward some and they come off.
those are the pics but it is the nut behind it and it won't even move when i do what nightsterman said. and no needle nose plyer will fit in there. i got the other one out with my hand but this one wont budge. and my " U " clips wont fit in the other way. like this ^ . but it does fit like this U and it is so fustrating because it makes the boltsso hard to get off
Do you realize the retard that you said put them on wrong put them on the only way you can since the u-blot has to go around the frame and into the nerfs. If you put the u-bolt in threads to the ground you won't be attaching to the frame all you will do is attach the u-bolt to the nerfs because the nerfs sit on top of the frame
Similar threads
