Need Some Help.

[Motocrossguy17]

Hi so i got my case of my clutch as it wasn't working. but then i noticed the tab on the flywheel side was broken where the return spring grips on. so my grandad gave me a long spring with like a keyring ring on it and i hook it on the clutch arm spring and attatched it to a bolt that was on my frame. not sure what the bolt done as there was nothing there apart from the bolt and a washer. clutch is working a little better but when i put it in gear(cold.) it won't turn the wheel when i pull clutch in.

thanks

 

[Awk08]

i was following you, till that last sentence....

"wont turn the wheel when the clutch is pulled in"
???????????????????

 

[Motocrossguy17]

i was following you, till that last sentence....

"wont turn the wheel when the clutch is pulled in"
???????????????????

like i have it on axle stands as iv currently got my wheels off to paint them. and i put it in gear without starting and pulled the clutch lever in but the back wheel won't turn .

 

[Motocrossguy17]

as like iv always dealt with 4 stroke dirt bikes and when i pulled the clutch in on them they would free roll. but this won't?

 

[scotj77]

my clutch does that before i start moving on it. damn clutch discs stick together.

 

[Awk08]

usually the bike needs warmed up fully before the rear wheels will turn freely, as the clutch fibers will stick to the steel plates until warmed up

give that a try and report back

edit...damn scotj = double fast ninja, LOL

 

[Motocrossguy17]

my clutch does that before i start moving on it. damn clutch discs stick together.

ah thanks man! so like if i warm it up and ride it it should be fine? my clutch is finally working now and im desperate to get out on it but i can't as im waiting on parts coming for abroad. eg nerf bars,cut out switch, seat cover and rear grab bar

 

[Xero]

yeah mine is the same, if its left to sit and then you try turn the wheels in gear even with the clutch it it wont work, as soon as you start the bike it works great I:I

 

[scotj77]

ah thanks man! so like if i warm it up and ride it it should be fine? my clutch is finally working now and im desperate to get out on it but i can't as im waiting on parts coming for abroad. eg nerf bars,cut out switch, seat cover and rear grab bar

yes, once you pop it in gear the first time it should work freely after that. it will probably jump a bit and stall when you first try to take off. it'll be fine after that

 

[Motocrossguy17]

usually the bike needs warmed up fully before the rear wheels will turn freely, as the clutch fibers will stick to the steel plates until warmed up

give that a try and report back

edit...damn scotj = double fast ninja, LOL

thanks awk he is pretty quick lol . just got to check my front brake shoes and then put my yellow rims on then fit my grab bar and nerf bars then i can get out the nerf bars should be here this week and the grab bar in about 2 as there coming from the us lol but got a cut out switch coming as well. would of had yellow handguards coming as well but paypal has put a limit on my account and can't buy i have bought them but can't pay so having to cancel them :-\

 

[Motocrossguy17]

yes, once you pop it in gear the first time it should work freely after that. it will probably jump a bit and stall when you first try to take off. it'll be fine after that

thanks never great with 2 strokes apart from rebuilding lol but when it comes to technical problems id rather deal with 4 strokes haha

 

[Motocrossguy17]

yeah mine is the same, if its left to sit and then you try turn the wheels in gear even with the clutch it it wont work, as soon as you start the bike it works great I:I

thanks man hows the quad going ?