Need help

[INITUWINIT]

my 02 blaster carb. won't let any gas thru it. i have it off and i cleaned it. when its assembled and i put the gas line on i cant get gas to the bowl. i have it off and tried to blow thru it but no flow. what can i use or do to get this cleared. another question , where does the gas actually enter the bowl? - is it the brass tube.

 

[MINIGfather]

it would prob be easiest to just rebuild the carb since it sounds like youve torn it apart to blow air threw it....

 

[INITUWINIT]

i think its clogged in the casting. are these easy to get

 

[MINIGfather]

if your asking about the rebuild kits there all over ebay or you can just get them at your local moto dealer or whatever. there usualy around $20...heres one on ebay buy it now for $14.50 and bout $4 s/h....

Blaster YFS200 200 Carburetor Carb Rebuild Repair Kit: eBay Motors (item 200430243403 end time Sep-16-10 14:52:18 PDT)

 

[MINIGfather]

there pretty easy to rebuild too...do yourself a favor tho...clean the outside of the carb real good before you rebuild it. you dont want all that dirt and grime getting in while your rebuilding. i sprayed my down real good w/ engine degreaser and then used a tooth brush and other cleaning utensils on the outside to get in the lil spots then i rebuilt mine. i rebuilt my 1st one by myself in bout an hour and havent had any probs.
also those kits come with all the stock stuff. if your bike has a pipe or other add ons youll need to get different jets to put in. if it ran good before check what jets you have and just get new ones.

hope this helps you out. sorry its so long.....

 

[caseywoods5]

here is a carb rebuild kit for 12.95 and shipping and handling are always cheap this is where i get alot of my parts from.

Moose Carb Kit - DennisKirk.com