NEED HELP!! vid inside

[jbblaster]

ok heres the deal. the other day when i was taking my pic for my avatar it didnt have power to pull a wheelie! but anyway it only idles good and then it spits and sputters and then after you hold it WOT intil it finally hits the main jet and it flys!!! so ive cleaned the carb three times, adjusted the float, the reeds are ok, good compression. can somebody help me?

 

[03blasteryfs03]

piolet jet is too big and adjust your airscrew

 

[jbblaster]

the airscrew is fine but it may be the pilot. but i didnt mess with it before it started doing it

 

[Blasterdude27]

What oil ratio are running? what size is your piolt?

 

[jbblaster]

im running 32:1 and i think its stock pilot.

 

[03blasteryfs03]

is the choke sticken or pull the pilot jet it might be cracked

 

[jbblaster]

the chokes not sticken. it only spits and sputters for 5 seconds and then it clears out and thats WOT the whole time.

 

[03blasteryfs03]

how about the seat

 

[jbblaster]

how about the seat

what seat?
1515151515

 

[03blasteryfs03]

that the float connect to that allows fuel to go in the carb and how many turs is ur airscrew set at

 

[jbblaster]

sorry i got caught up in the first 2 days of school. but the airscrew is fine im sure. that seat looks ok. but my blasty was running rich before this and now its lean. but it sputters at 1/4 throttle to WOT but it hits the powerband hard if you hold it wide open for long enough, but sputters on between 1/4 and WOT. its weird!!

 

[darealblaster]

did you change the pilot jet like we have been telling you?? also clean the air filter. mess with the needle too,im pretty sure its the pilot and needle

 

[Blasterdude27]

just a shot in the dark.. check your wiring, mess with anything like that latey?