I'm new to this site I hope I'm under the right spot haha. I'm fixing my friends blaster for him but it's a headache need help. He has a 1999 yamaha blaster he bought it not running guy told him "just needs reeds" the reeds were snapped but didn't get into motor so I removed them and put brand new stock ones in then put all fresh gas mixed 32 to 1 the oil injector system was removed and I check it all over to make sure and it was fine. The bike started up and ran like sh*t. Rode down the street and it would only go like 3mph full throttle or half it would bog and smoke more then it should. Read to try replacing crank shaft seals so I did and it helped a lot so no it has more power but it still bogs it's like jumpy. So now I'm guessing it's carb I got a stock carb with 280 main 32.5 pilot jet. 3 clip on the needle and it's running 32 to 1 with a new plug k&n air filer and fmf fatty pipe with fmf silencer. I can post video if helps