I just completely rebuilt it top end and bottom whole kit from wiseco replaced everything .80 over ported head vforce reeds pro circuit exhaust full asv levers nerf bars fly racing high rise bars duro grips extended gforce banshee +4 axel
I eliminated the tors and oil inj with the new harness I got new cdi new ignition coil new kill/start switch I have no idea why I'm not getting any spark
so you did see if plug was sparking by grounding it to side of cylinder or summin,did you paint anywhere were the grounds go? are the cdi and coil compatable....tenth digit on frame by foot shifter is year. there is 4 wire stators and 5 wire stators.
Try a new plug.
Or unplug your kill switch and key switch and make sure that's not the problem.
If that doesn't work make sure your fly wheel and pick up on your stator is free of rust or debre