I am almost finished with my new Blaster. It just needs some work to make it look good. Any suggestions for making it look better would be appreciated.
My rebuilt Blaster
- Thread starter wolf424242
- Start date
03+ plastics, repaint the a-arms, get rid of those rear tires, and make sure your front left wheel is all good because its leaning. other wise 
oh and your front shocks are upside down!
oh and your front shocks are upside down!
looks not bad man.... just needs a lil tlc..... id say get better tires repaint the frame and get some shock covers for those shocks.... what are they off of? and check ur a-arms cuz the top ones sort of look bent
those look like 'zilla or 'racer shocks to me.. i say paint the a arms the sme color, i personally cannot stand the 2 color look. 
those look like 'zilla or 'racer shocks to me.. i say paint the a arms the sme color, i personally cannot stand the 2 color look.
Neither can I. I bought it that way.
take some measurements and make sure that the shocks are the same distance from the frame on both sides....something looks a little strange there, but it does have aftermarket a arms. more pics of those upper shock mounts would be cool too......just to make sure they aren't going to break the first time you ride it real hard lol
The front bumper is bent so everything looks a little crooked.
Also, what is bad about those tires? I don't know much about them, but what makes ITP Holeshots better?
I will upload pictures of the shock mounts tomorrow. I rode it all day today and nothing fell off so that's good, but I know nothing about welding.
Also, what is bad about those tires? I don't know much about them, but what makes ITP Holeshots better?
I will upload pictures of the shock mounts tomorrow. I rode it all day today and nothing fell off so that's good, but I know nothing about welding.
How do you know that they are upside down because I'm pretty sure they are not?
Last edited:
I just flipped the front wheels and it widened the front four inches. I am going to get nerf bars in a few months and hopefully my parents will also let me buy new tires as well (I can't decide if I should get Holeshots or Razrs so suggestions are appreciated for tires and also nerf bars). These are the custom shock mounts. The stock shock mounts are just under the custom ones.
thats a nice custom shock mount
and maybe a diff bumper i think it looks good now just needs washed lol
and maybe a diff bumper i think it looks good now just needs washed lol
I just washed it yesterday but I got bored and didn't feel like finishing because I do not have a power washer. I suppose when I have money I will buy 18x10-8 M932 Razr tires for the rear unless there is any good reason to not do so. I still need nerf bars and after everything else, I will buy a bumper and shock covers.
i would say... check ur front end bec even tho ur bumper is bent it looks like ur upper a-arms might be... or ur steering arrangement might be making ur wheel bent
The steering arrangement was the problem, but it's corrected now. Those pictures were taken after riding in the pit and at full speed on the road for a few hours, so it vibrated loose.
I looked at the air filter in my Blaster to clean it today, and it was torn apart. I never thought that would happen just from riding it. I suppose I will now buy a Uni filter since I have heard they are the most efficient.
i like it and who needs a pressure washer a water hose and a bottle of purple power works for me and after i go to the trails car wash and purple power lol
