i have a motor, sitting on a bench, in my basement. calling my name to be rebuilt. going to bore it out, but what should i do? big bore kit? just an oversize piston? you tell me! im only about a year into my bike, and ive put a fresh top end in the motor on the bike, but ive never had to do any machine work to a motor. (take into mind im looking for the least expensive, but most beastly upgrade i can find) so, on that note. big bore? oversize? stroker crank? milling my head? flywheel advance? notes on prices, and actual performance gains would be amazing. thanks guys!
motor rebuild suggestions?
- Thread starter lobes
- Start date
sup man....id put an exhaust sytem on, do a timing advance and then change your gearing...this is only if money is real tight of course....i rebuilt my whole engine myself and did a stroker and rebuilt the top end to a .80 overbore and there was a great difference but it was pricey...i think if u do the listed above u will be very satifyd for the money...taking apart the motor takes alot of time and patience....plus with a stroker comes other work as well...so idk...id start with the advance and a exhaust...toomey pipes and fmf are good
Similar threads
