Mods i can do today?

[Cmh156]

Well my blaster is broken right now so i need some mods i can do to it while its apart.

Already got these.

Oil gear removed.
Front wheel flip.
Think thats it?

I really want to cut my wiring down,i just need the main stuff you need,like a race harness and the wires for a head light.

Let me know guys im really bored and need something to do.

 

[Cmh156]

Anyone.....

Id like a guide on the wiring harness mod.

 

[blasterman87]

i removed all the tail light wires, its easy just follow them and cut, also timing advance, and rip all the tors crap off it.. maybe relocate the key to the fender or something like that... take sand paper to the throttle cover and pilish it, that can be done to the clutch cover also and looks cool.. cut the pedal off the kick starter i like the clean look,clean your air filter, get a grease gun and lube everything.. that should keep you busy

 

[blasterkid114]

go out and get shocks and arms and maybe even a swinger=] CAUTION: May burn a big hole in your wallet!

 

[Cmh156]

i removed all the tail light wires, its easy just follow them and cut, also timing advance, and rip all the tors crap off it.. maybe relocate the key to the fender or something like that... take sand paper to the throttle cover and pilish it, that can be done to the clutch cover also and looks cool.. cut the pedal off the kick starter i like the clean look,clean your air filter, get a grease gun and lube everything.. that should keep you busy

Dont have a carb mine is toasted so i cant do the tors sh*t. Dont have a key on mine. I like the kickstarter,air filters new,and everything was greased recently.

Can i cut the tors wiring and the brake sensor wires off?

 

[blasterman87]

yes, you can remove all the tors wires still just find the plug and take all the wires off, theres a box under the hood thats tors also, and the wires going to the throttle housing

 

[Cmh156]

yes, you can remove all the tors wires still just find the plug and take all the wires off, theres a box under the hood thats tors also, and the wires going to the throttle housing

Do you know which box? Hahah i dont want to mess my wiring up and need a new harness/.

 

[blaster195]

also you can polish the tie-rod ends i think thats the name of em just did it to mine they look chrome

 

[blasterman87]

post pics 195??

 

[blaster195]

k will do you got aim so i can send them to you so you can put on da forum internet is too slow

 

[89custom]

do the timing advance mod for sure.

 

[ruthless_one3k]

Man I wish you would have told me you needed a carb. I just sold my spare stock one today.
Also the shift star mod is pretty easy

 

[Cmh156]

Man I wish you would have told me you needed a carb. I just sold my spare stock one today.
Also the shift star mod is pretty easy

-.- hahah.

Whats the shift star mod do,i think mine has it done already,is it were you kind of grind the star some to shift easier?

 

[blasterrider119]

any thing that a magnet isnt sticking to can be polished

 

[DUALSTROKE]

any thing that a magnet isnt sticking to can be polished

If a magnet doesn't stick to it then it is easier to polish(most of the time).However steel can be polished the same way just more work and need to keep it clean or clear coat it when done.

 

[blasterrider119]

oh ok thnks for the heads up man

 

[blasterman87]

does clearcoat really keep it from rusting and getting ugly again?

 

[ruthless_one3k]

yeah the shift star mod is where you grind the points down and round the off

 

[blasterman87]

remove all extra parts, like plastics/seat/bumpers/brakes/headlight... then it will be lighter,faster,and lean..also unstoppable!!

 

[Cmh156]

remove all extra parts, like plastics/seat/bumpers/brakes/headlight... then it will be lighter,faster,and lean..also unstoppable!!

Lol im getting there only have front brakes,pretty much no front fenders,no bumpers,no lights ahah.