after readin all the stuff about big mods equils an F7 pipe and all that, all im planning on doing is throwin some reeds in then a right bend pipe. should i still get an F7?? or go with a toomey?>?
mods for pipe
- Thread starter blasterbuddy200
- Start date
If all you plan on doing is the vf3's and maybe a 28mm carb down the road then toomey would be fine. BUT if you plan to or think you might plan to upgrade like porting or crank or bigger carb then just go with the f7. The f7 will work fine on the almost stock bike you have and will still leave room to grow which is not the case with the toomey.
so basically go with the toomey? i dont plan on doing any upgrades carb wise, but exhaust and v force reeds are my next move engine wise
If you are almost certain that reeds and pipe are the only thing your gonna do then a toomey will work great. BUT you may have gotten the wrong message about the f7. the f7, lrd, and dynoport pipes(the ones people say are a must for lots of motor work) all will work great on a slighty modded or even stock bike like yours. I've heard of people running f7's and lrd's on completly stock bikes except open air box and their blaster ripped pretty good.
I would personally just buy an f7 or lrd pipe from the get go. They will performa great for your almost stock bike but will leave room for upgrades if you decide to port the jug a couple years down the road.
