lrd exhaust ?

[mattstang]

Ok to start how is a lrd exhaust system. There is a guy selling 1 for 200 around my way and it looks new is this a good deal. And. I read read they are adjustable how do I no which way to put it on for eathier top end or tork ?

 

[JonS]

i dunno about the adjustments, but buy it now. it's worth it. you can tinker with the settings after you get it.

 

[99LRDblaster]

Ok to start how is a lrd exhaust system. There is a guy selling 1 for 200 around my way and it looks new is this a good deal. And. I read read they are adjustable how do I no which way to put it on for eathier top end or tork ?

The first gen system was an adjustable pipe. It was only produced a few years. After that, LRD switched to a fixed pipe system that was the RFX pipe. It's more than likely an RFX pipe as that's what probably about 85% of them are. If it's in good shape and looks like new, I'd pick it up for $200.

 

[slickerthanyou]

Ehhh, I had one and didn't like how it mounted. I has a new home now and has done the job quite well. $200 for complete exhaust silencer and all isn't too bad if it's in perfect shape. As far as adjustment, extend it for low end shorten it for top end.

 

[bagds101]

i found an almost new sheerer near me for 200. if i had cash i would have snagged it

 

[mattstang]

Ok just picked the pipe up. I got it for 175 because it had no cupler or spring my question is now how do you keep it in the extended setting

 

[1995blaster]

i got one screams up top little doggy down low

 

[blasterdemon7]

Post pics so we can see if it's adjustable or not.

 

[1995blaster]

i got mine for 140 and dg exhaust prob over payed but idc

 

[mattstang]

it is def the adjutable 1 i got it all mounted up and it seams to run alright the bike is all stock with a uni filter and the exhaust i had put a 260 main jet in it but i think it can take a 270 how do you guys think it should be ran with the set up,, would it run better adjusted for tork or top end didnt really get to try it out yet just looking for some opinions and also what gasket should be used with it a stock 1 or a special 1 made for the pipe it seems to be leaking alittle

 

[1995blaster]

i just put a lil high heat silicone on the base and did it come with the bracket to hook up to the a arm bolt?

 

[mattstang]

i was going to try the high temp silicone just wasnt shure and it didnt come with a brackit but i just used a piece of flat steal for that and it works great

 

[1995blaster]

thats what i used to i dont even have a spring in mine becuase of how strong the mount is but im gonna put one one tho how did you like the bottom end?

 

[mattstang]

as of now i am running the pipe fully closed so i guess that should be at the high rev top end setting and it is alittle dead on the bottom but really didnt get to play much beings it was dark and my light is disconectd but some fine tuning and maybe changing the setting i think it will be all right

 

[1995blaster]

im in the same boat my clamp wouldnt fit to the silencer so i just put it on and it leaks so i got to take the silencer off and im gonna adjust mine all the way open

 

[UncagedShadow]

think you could get some pics of the new pipe?