Loose chain problem!!!

[DURAN153]

well ive noticed that the chain on my blaster is loose...ive looked everywhere to see on how to tighten it but have found nothing...if anybody knows how please let me know!!! HELP PLEASE!!!:-/

 

[manson6]

You generally need about 1 1/2 to 2 inchs of travel in your chain for the suspension to work good, but the adjustments are on the rear of your carrier. Loosen the locknuts and tighten the bolts and it will put more tension on the chain, Tighten the locknuts down and your good. When I raced sportbikes I always ran an ass load of slack in the chain for suspension travel.

 

[xjma]

try to adjust it with someone on the bike. too loose and the chain may jump the front sprocket and bust the case.

 

[Blaaster]

Make sure the adjusters are equal lengts, if there is a difference in the amount of thread showing , the rear sprocket will run out of line, and the chain may come off regulary.

If the sprocket is out of line it is going to make the chain wear excessivly.