L.A Sleeve 240 Kit

[FLOTEK]

what port and polish do you recomend? i also want t get a +4 stroker. thanks.

well in stock form they are decent for play riding but theres so much potential to work with o n a la sleeve kit head setup reed cage and the intake benefits and available volume its all definitly a big bonus fro ma builders perspective .with the right porting ,bolt on mods in the right chassy setup it can be downright deadly o n a strip ,member only2strokes is my sponosred rider we have his dialed in pretty good on gas,it hits 6.7seconds in 500 feet at 80 mph , i have never seen him lose to any modifed 4 stroke production atv i n any drag race ...doesnt matter if its a cherry bomb ltr450 or piped cammed 700 rapterd ,they all fall to this 244

heres a run versus a modifed 450 with a good rider in 300 feet ^

 

[coreyownz]

but what else is done to that other blaster the 209cc prolly an ass load of stuff.. u can tell a pipe

 

[FLOTEK]

but what else is done to that other blaster the 209cc prolly an ass load of stuff.. u can tell a pipe

this one ? Video of 209cc STOCK JUG FLOTEK BLASTER - Photobucket - Video and Image Hosting
porting ,a vitos 3mm stuffer crank ,power pro pipe,35mm pwk carb ,milled head ,nothing insane its probably about a high 40's horse setup for a stock yamaha jug thats only .040 oversize i belive
probably only like 800 bucks in performance mods

 

[mdebuck]

i just bought a vitos 240 kit and i heard the piston is sh*t on it, i found an LA sleeve 240 kit piston on ebay for $129 plus $8 shipping, for 1 i would like to know if the piston would be able to work in the vito's and 2, i would like to know if thats too expensive for the piston,

 

[FLOTEK]

it should work

 

[tjsdaname]

I have always wondered if porting changes the sound any??????

 

[mdebuck]

ok but is $138 a lot for the piston, i just wanted to make sure their wouldn't be anything wrong by putting the LA piston in the Vitos jug with the intake and exhaust windows not matching up or sumthing like that

 

[110octane]

do your research

ok but is $138 a lot for the piston, i just wanted to make sure their wouldn't be anything wrong by putting the LA piston in the Vitos jug with the intake and exhaust windows not matching up or sumthing like that

I cant tell you the answer. BUT, I can tell you that you need to find out what size piston is supplied with each kit, if they are the same size then yes it will fit.

 

[FLOTEK]

the la sleeve piston has a very different window style on the intake due to the use of a 250r intake design of the sonic kit versus a stock design like the vitos kit uses ,this can be modifed or not and will work .72mm is standard

 

[245stroker]

I'm running one in mine and haven't had any problems. Of course I didn't build the motor, so I'm not sure if the piston had to be modified. $138 for a bb piston is about right