i scored a running 01 blaster last week for my wife's Valentine's Day gift, float height was out of whack and owner couldn't figure it out, got it set up now. It has a Toomey pipe and silencer, I looked online and the kit for the pipe includes a 310 jet, which is what's in it, but it's running way too rich. You couldn't even ride it with the floats adjusted right on a 310 jet on an open airbox and no filter. Even with a 270 jet in it it's somewhat boggy until fully warmed after putting on it for 5 minutes without a filter on it, almost like I could go to a 260 but not sure until I do a plug chop on it.
Is that normal for the pipe kit to include a 310 jet but the bike likes one way smaller like a 260/270? Also put new reeds in it. I have the floats right at 21mm, and carb cleaned spotless.
Is that normal for the pipe kit to include a 310 jet but the bike likes one way smaller like a 260/270? Also put new reeds in it. I have the floats right at 21mm, and carb cleaned spotless.