jets plz help

[x-man]

So I I'm planning on doing a Gold Series FMF fatty pipe and an aftermarket airbox I'm not worried about engine mods now but I was told that I should use genuine mikuni carb jets so i want to carb parts Warehouse I've got the stock carburetor on there now I know I'm going to need a bunch main Jets and others please point me in the right direction

 

[Awk08]

Buy 270 thru 310 main jets.
Start large and plug chop down

The stock pilot jet and needle will work for you.

There's also links to mikuni jets on eBay listed in the jetting section at the top of the carb section on here. Buy them all at once and only pay 1 shipping fee.

Here....http://www.blasterforum.com/threads/mikuni-and-keihin-main-jets-on-ebay.58225/

 

[x-man]

Buy 270 thru 310 main jets.
Start large and plug chop down

The stock pilot jet and needle will work for you.

There's also links to mikuni jets on eBay listed in the jetting section at the top of the carb section on here. Buy them all at once and only pay 1 shipping fee.

Here....http://www.blasterforum.com/threads/mikuni-and-keihin-main-jets-on-ebay.58225/

ok cool thanks is plug choping hard or is it just one of them tedious processes to get it right iv seen videos of it but never had to do it myself

 

[nick20555]

ok cool thanks is plug choping hard or is it just one of them tedious processes to get it right iv seen videos of it but never had to do it myself

The most tedious part is trying not to burn your hand when taking the plugs in and out and then finding a way to chop the threads off without chopping off the whole tip