Jet size plug chop or leave it

[Maa]

Sup guys I have a Dmc alien full system and it calls
for32.5 pilot jet and a 260 main jet. I just got some vf3s
and haven't jetted it yet. Do u guys think runnin these jets would
be alright for now or should I just do a plug chop

 

[Awk08]

whats your elevation ?
sea level requires richer jetting than say...1800 ft above sea level, or higher
i'd start with a 300/290 and work down doing plug chops
260 sounds lean for any A/M pipe besides a DG

 

[Maa]

Not really sure with the elevation I live in the woods of NH

 

[Awk08]

Not really sure with the elevation I live in the woods of NH

google.......... (your city) elevation

it's not that important, i was just sayin that nobody can tell you what main jet, as elevation changes whats required, you have to plug chop down till you get it right

 

[Maa]

Ok I'll do that thanks again awk

 

[Blaaster]

DMC says in their fitting instructions that the stock needle should be on its richest setting, bottom clip.

As Awk says start big and plug chop!