Issue with my clutch

[Bigjay420]

i had just did a lower end rebuild and got everything put back together but for some reason the clutch plate does bolt all the way down on the discs there is like maybe a little over a 1/16 of an inch gap in between. did i not shim something right?

 

[fioz600r]

what exactly do you mean by clutch plate

Got any pics?

 

[Bigjay420]

sry its the pressure plate

 

[fioz600r]

do you have all the fiber and metal plates in and the spring plate thingy?

 

[blaster99]

there should be 5 or 6 bolts with springs and washers holding the pressure plate on,theres the clutch inner hub that uses a lock washer if not there will not touch the bottom of it

 

[Bigjay420]

i have all the disces and plates in and when i put that inner hub on i put washer on the back of it so i download a manual and i looked up the diagram for it and i have everything in there and in the right spot but still will not lock up i can put it in gear and roll it forward and the crank still will not move

 

[Bigjay420]

X(im such a idiot after spending like 3 hours staring at the dang clutch all it was i didnt have a dang dots lined up so the teeth wasnt sliding into the groove on the inner basket but oh well i got her fix

 

[fioz600r]

Good to hear you got it all figured out bro......