Guys, I'm running out of oil in the garage and i came across some Pennzoil Premium Outboard and Multi-Purpose 2-Cycle Oil. It is TC-W3 oil. Says its for Outboards, Snowmobiles, Chain Saws, Lawnmowers, Motorcycles, and String Trimmers. Is this oil safe?
*Approved where NMMA (formerly BIA) TC-W, TC-WII, or TC-W3 performnace oil is recommended .
*Good for water-cooled and air-cooled two-cycle engines.
*High Flash point (over 200*F) for safe storage.
*Recommended for pre-mix and injector systems.
*Always follow the dilution ratio and oil performance level recommended in the owners manual.
I don't know what any of that stuff means in terms of putting the oil into my blaster.
*Approved where NMMA (formerly BIA) TC-W, TC-WII, or TC-W3 performnace oil is recommended .
*Good for water-cooled and air-cooled two-cycle engines.
*High Flash point (over 200*F) for safe storage.
*Recommended for pre-mix and injector systems.
*Always follow the dilution ratio and oil performance level recommended in the owners manual.
I don't know what any of that stuff means in terms of putting the oil into my blaster.