yamaha blaster New Member Jun 15, 2008 1,193 5 0 Michigan Jul 22, 2008 #1 I have a 2000 yamaha blaster and the chain has 3in. of play in it thats from pushing it all the way down to all the way up so pushing it has far down as it will go, to pulling it up as far up as it will go.
I have a 2000 yamaha blaster and the chain has 3in. of play in it thats from pushing it all the way down to all the way up so pushing it has far down as it will go, to pulling it up as far up as it will go.
Blasterb0y794 New Member Feb 4, 2008 5,084 59 0 New York Jul 22, 2008 #2 adjust it with the chain tensors
01blasterdude New Member Jun 2, 2008 391 6 18 Bradshaw, Nebraska www.wolfesmetalfabrication.com Jul 22, 2008 #3 They are on the back of the carrier that holds the axle. adjust them evenly so your quad drives nice and straight.
They are on the back of the carrier that holds the axle. adjust them evenly so your quad drives nice and straight.
Mrbrocco New Member Aug 18, 2007 768 5 18 37 Jul 22, 2008 #4 01blasterdude said: They are on the back of the carrier that holds the axle. adjust them evenly so your quad drives nice and straight. Click to expand... what you mean by adjusting them evenly and could you take a picture of what the tensioner looks like
01blasterdude said: They are on the back of the carrier that holds the axle. adjust them evenly so your quad drives nice and straight. Click to expand... what you mean by adjusting them evenly and could you take a picture of what the tensioner looks like
01blasterdude New Member Jun 2, 2008 391 6 18 Bradshaw, Nebraska www.wolfesmetalfabrication.com Jul 22, 2008 #5 Sure...BRB....with a pic
01blasterdude New Member Jun 2, 2008 391 6 18 Bradshaw, Nebraska www.wolfesmetalfabrication.com Jul 22, 2008 #6 You can see in the one picture the notches on the top of the adjusters (silver adjusters) Loosen the lock nut, and then tighten the bolt to tighten the chain, then retighten the locknuts. You can use the notches, and the bolt lengths as a reference to make sure you are getting them evenly.
You can see in the one picture the notches on the top of the adjusters (silver adjusters) Loosen the lock nut, and then tighten the bolt to tighten the chain, then retighten the locknuts. You can use the notches, and the bolt lengths as a reference to make sure you are getting them evenly.