is a jetted carb worth getting

[Diabolic]

hi guys i can trade a set of plastics and a stock carb and a set of rims and tires dfor q jetted carb and it will also be put on is it worth that?

 

[scotj77]

jets cost about 5 dollars a piece, and take about 5 min to change. is it just a stock carb? got any pix?

 

[blasterBruce]

I would not do that trade , you should be fine with stock jetting with only the DG exhaust

 

[blasterdemon7]

Jetted carb??? All carbs have jets. You can't just buy a carb with bigger jets and be good to go. There's many things that determans what size jet you need and that itself will change do to temps.

 

[Diabolic]

ok are carbs hard to change i have an extra carb off my other blaster...my carb like drips out gas i had another post about this im looking to fix this problom any ideas? i can either fix the one i have or just swap it out with the other carb what should i do

 

[Awk08]

Jetted carb??? All carbs have jets. You can't just buy a carb with bigger jets and be good to go. There's many things that determans what size jet you need and that itself will change do to temps.

/\ BAM !!!!!!
nobody but you can jet your carb, there is no magic person or company that can do so without having their hands on your bike

 

[sporty982000]

Car rebuild kits are easy to do. you just have to takwe your time and remember that your idle screw, remember where it was at, before you replace with new one.

and don't turn them all the way in tight, easy to over tighten them and damage the tip / end on the idel screw and air screw.

But overall easy to do.

Why not fix the one you got, rebuild kit and get a new float too.

Any carb that has not been in use for awhile, needs cleaned and perhaps new gaskets.

Sporty

 

[Blaaster]

Clean the carb you have, refurbish the needle and seat , set the float level.

Re fit and set the idle correctly.

On the DG pipe I believe it breathes better than stock, and will call for an increase in main jet size.