Intake for vf3's

[hspecer]

I am looking for an intake to use with vforce 3 reeds and a 33mm keihin. Looking for something that works without mods. Got any ideas?

 

[Braaaptor]

I would look at Pro-Design. They are well-made and have boots for a variety of carbs. Just be SURE you get the one DESIGNED FOR VF3 reeds. They should make an intake with a cut-out in the back to accomodate the stuffer block used on the VF3's. A generic Pro-Design intake made for the stock reed cage WILL NOT WORK with VF3's. You'll just need to do a little looking around before buying one.

 

[bagds101]

for your intake boot, (the one that goes from your engine to your carb) you can modify the stock one to fit with vf3s. as for the 33mm carb, not sure if you can modify it or not. but as for a intake, you can get a custom air box, or put a air filter on the back of your carb. thats what i am running and alot of guys on here are too. theyre good unless you are going to do alot of mud/water riding.