J juci2728 New Member Jan 28, 2011 23 0 0 May 17, 2011 #1 I can't seem to get my intake boot to seal to my spacer. Whats the best way to fix this problem. Thanks
I can't seem to get my intake boot to seal to my spacer. Whats the best way to fix this problem. Thanks
N nd jat New Member Aug 10, 2008 429 4 0 mandan ND May 17, 2011 #2 A smearing of silicone around the gasket, just a thin coat thou.
S Surfrjag Member Mar 18, 2010 2,760 34 85 chesapeake, va May 17, 2011 #3 will silicone stand up to the gasoline? i would use a gasket and or some yamahabond
N nd jat New Member Aug 10, 2008 429 4 0 mandan ND May 17, 2011 #4 ok rv silicone will my bad. not sure about ordinary silicone thou.
BlasterMaster15 New Member Jan 23, 2011 281 4 23 New jersey May 17, 2011 #5 i can tell ya first hand normal silicone will not work definately use RTV. been there, broke that
mac2mac Member Jan 31, 2011 529 7 55 New York May 17, 2011 #6 Don't be cheap buy new gaskets they are only a few dollars.
L Larry's Shee Active Member Technician May 23, 2009 9,271 1,057 149 Ortskaville, MI May 18, 2011 #7 Plain old Pematex #2 or three bond/yammabond
Antec1200X Member Nov 11, 2010 1,301 11 43 44 Fort Nelson B.C May 18, 2011 #8 i used the motoseal1 same stuff i sealed my crank halves with.havnt had a problem yet
