info

[speedyslyder]

you should be able to see through pilot jet,which you need to take out with a small flat head screwdriver,and if your floats are sticking it will either no let gas in or just flood it. if you have not taken out pilot jet and soaked and are able to see through it holding up to a light...i would compression test it asap,30 bucks at a auto parts store,running and stopping sounds like a sticking float needle.

 

[travis88]

I can see throw jet if I let sit it Wil start and die the old tor is still on it going to put kit on it would that have any thing to do with it

 

[travis88]

So win I put tor elm. Kit will that fix the problem

 

[speedyslyder]

read through the carb section on here,and read some more...The idle is under the seat.,air screw is 540 degress=1 1/2 turns out from fully seated...It is hard to help you cuz i dont know what you alread know and it sounds like you are posting from a phone,and the lingo is off.

 

[travis88]

Yes on my phone lol by reading your post I think my pilot jets way off and the idle screw under seat goes to tors

 

[speedyslyder]

tors=throttle over ride sytem....big screw on top of tors brick is the idle turn it clockwise to raise idle,the airscew is by,where the fuel line from tank goes into carb,turn it to the right all the way,then back it out 1 1/2 turns which equal 540 degrees,and then set your idle with quad running......also it it runs for 5 min then dies,it is running out of gas more then likely,which leads to believe you gots a fuel flow problem,also check to see if your gas cap is ventilating properly,unscrew it a lil to see if it helps at all.

 

[travis88]

Ok and I'm take tor off win new part gets her and about the sprocket is the good a 14 font with a 40 back on 20s in back and 21 tires

 

[travis88]

And you said the vforce 4 read would help

 

[speedyslyder]

adding a tooth to the front,well depending on your mods is going to make it take off slower and gain top speed,and yes the v force 4 are the best you can get,should improve throttle response.....

 

[travis88]

Ty win parts get here and I get all together if any thing goes wrong I'll message. U help me a lot

 

[Blaaster]

It would be a good idea to start from scratch.

First thing to do is leak test the engine to see if there are any air leaks.

If you have been building and racing bikes for a long time I will presume that you have a tester.

In case you cannot remember how to use it here are some instructions.

 

[DUALSTROKE]

I would offer some help but there is no way to try and understand what you are saying. Some punctuation and correctly spelled words would be a big help. I would guess stop trolling or turn on auto correct.

Quotes by you:
Don't no on jet I just got a week ago I've been rebuilding bikes forever and racing. First fourwheeler I show u pic
Won't let me send pic.

Can't upload don't no but there sqwear um the look around 20s or so

O and my air cleaner is red pre oiled. something lol sry but it's not stock
End Quote:

Rebuilding bikes and racing forever but have sqwear tires, red pre oiled filter, and plenty of compression since it starts for a second. Post a pic of your blaster with todays date and your screen name in the pic and type like a normal human being and you may just get some quality help from the folks on this forum. Knowatimsayin????

 

[Blaaster]

/\ /\ if you need a seconder for that motion! then my hand is up.

 

[Blaaster]

I just bet them sqwear tyres are a biotch to sit.

 

[DUALSTROKE]

I just bet them sqwear tyres are a poop to sit.

 

[Blaaster]

I have a tinny boat that rides like that, I call it the turd riveter.

I had to change my undies.

 

[travis88]

Wow y'all are really nice. thanks

 

[travis88]

You ppl must have no life but set and pre read just to down someone did if make you fill good did it pleasure you wow for ppl trying. To help your disrespectful. And rude and a joke it's ok it will come around

 

[DUALSTROKE]

You ppl must have no life but set and pre read just to down someone did if make you fill good did it pleasure you wow for ppl trying. To help your disrespectful. And rude and a joke it's ok it will come around

Again can we please get some correct English. To try and read what you typed is painful. How do you expect us to help if we can't understand? I already asked for some what correct grammar and got a 6 word reply that is almost typed correctly and another response (quoted above) that my 11 year old couldn't read and comprehend. I wouldn't say that was too much of a request in order to give good information to your problem. If you can't do that for our community than we will just consider this trolling.

 

[travis88]

I understand and I'm on my phone Soo. This is the reason. of wrong grammar or missed spelled words I'm sry