info

[travis88]

Ok I just got a tors elmanter kit vforce4 reed. And 14 teeth sprocket. and it has a silencer. Pipes. And it's bored. 60 over will it help and any thing

 

[Blaaster]

What exactly is the question.

 

[travis88]

Will it make it better I had the tors on it but suck so just put some up grade

 

[travis88]

I have not got to ride yet still getting parts just did not no if it would e any better

 

[79 bronco]

So it look like you got a tors eliminator kit, vforce 4 reeds, 14 front sprocket, pipe and silencer and your bored 60 over.
Is this right?

What kind of air cleaner do you got?

If you got the carb jetted right and everything turned right with good compression, then you should be running better than stock!

What size tires do you have? If you have tall tires then the 14 sprocket may be a bit on the big size.

 

[travis88]

Don't no on jet I just got a week ago I've been rebuilding bikes forever and racing. First fourwheeler I show u pic
Won't let me send pic

 

[travis88]

Can't upload don't no but there sqwear um the look around 20s or so

 

[travis88]

O and my air cleaner is red pre oiled. something lol sry but it's not stock

 

[travis88]

But the Tires are not round and as tall as most I've seen

 

[79 bronco]

If you look on the side of the tire you well see the size and name of it!

 

[travis88]

Kinda 20 on back and 21 on front

 

[speedyslyder]

upload pics to...tiny pic then copy image code and paste or resize them 1mb or less
the reeds will help tors no difference...

 

[travis88]

Well if you want to no hole story you might have info I got the fourwheeler win I test road it just seemed bogged out but I thought I could fix well got it home road for a min and parked took off carb and socked and cleaned. Put it back next day started right up and had way more power well I road for 5 min started bogging at one so I repeat. But let sock for 2 days and spray all ports and put back well ran good 5 mins and bogged. Out and win I did carb2 time I cut tors. Well throw it all it would die and take for ever to start and backfire out the pipe so I got all the new parts o and I pre mix gas because oil. Ake was busted. But I've fix just not tyres yet

 

[speedyslyder]

? what year blaster are we talking about?
what is the compression,free flowing gas fron tank to carb?

 

[travis88]

I've not put any new part on yet but win I strate it runs for sec and dies its a 1999. Yes gas just runs down throw tube but I just put a fuel filter on it

 

[dirtysquared]

When you cleaned the Carb, did you blow out the passages with compressed air? Set the float levels?

 

[travis88]

No clue on comp. But win I take carb of and clean runs greats for a min so comp got to be good

 

[travis88]

Cleaned with air lost on set float. Lev

 

[dirtysquared]

Read this boss, it will explain it better than I can.

http://www.blasterforum.com/threads/how-to-clean-your-carbureutor.254/
http://www.blasterforum.com/threads/float-heights-and-how-to-adjust-them.50565/

 

[travis88]

I'll try the float thing but I clean carb same way. Any way so any info on starting and will the sprocket be better and vforce 4 reeds
And getting rid of tors