In need of advice about brake system

[Phoenix81]

Howdy ya'll,
I'm new to the fourm and we'll blasters in general. I keep reading about hydraulic brake conversion and I am wondering what I would need to do this? Any help and advice on this is greatly appreciated.

 

[Zbskater400]

You can buy a banshee rear brake setup off eBay but you will need to figure out a way of mounting the caliper and master cylinder.. a bracket can be welded to hold the master cylinder in place.

 

[Phoenix81]

From what year banshee should I get the brake system from? Or does it even matter?

 

[Zbskater400]

From what year banshee should I get the brake system from? Or does it even matter?

I believe any year. I have banshee brakes on my blaster but forget what year they are from.

 

[Phoenix81]

Now what can be done about doing the front with hydraulic brakes? Do I just get all the front brake equipment from a banshee also? I thank you for taking the time to help

 

[blasDa]

I believe any year. I have banshee brakes on my blaster but forget what year they are from.

But do they fit on any year blaster, seeing as how the axel and carrier are different sizes pre 03 and after 03?

 

[Phoenix81]

I have an 01 blaster if that is any help

 

[Larry's Shee]

Pre-03 you have to fab a caliper bracket. 03-06 everything bolts on.

The front is a whole nother story.

 

[Phoenix81]

Welder at the ready. Let's talk about the beast that is the front, what is needed?