ok, the ones on the carb look just like that, but i have nothin under the hood that looks like that, i have a big black box with bout 8 wires on it, and a little metal box with one wire runnin into it and a ground on it
Idles, but wont run
- Thread starter Plumber Man
- Start date
the one with a bunch of wires is the cdi box.the one to unhook has three wires.going to eat so if tors dont work check the reeds.make sure carbs getting fuel and youre getting spark. keep me updated check back later.
its removed then make sure its disconnected from the carb.check the above.hopefully you find the prob
how bought we try this DIY.
http://www.blasterforum.com/do-yourself-20/how-remove-your-tors-655/
and anything else you may want to know/learn, check here.
http://www.blasterforum.com/off-topic-7/almost-everything-you-need-know-about-blasters-14622/
89.
http://www.blasterforum.com/do-yourself-20/how-remove-your-tors-655/
and anything else you may want to know/learn, check here.
http://www.blasterforum.com/off-topic-7/almost-everything-you-need-know-about-blasters-14622/
89.
Ok, the tors seams to have already been disconnected, took the carb off cleaned it, checked the reeds, they look good, bout to pull my hair out, and go get some more beer cuz this is gettin ridiculous...lol
same thineg just happend to a buddy of mines does it sound like its bogging down when u hold in the gas?
ya it did bog down when i held in the gas, Im not sure what exactly it was, but i put it in third gear and took off, just puttin around, it would just barely stay runnin in 3rd with the throttle wide open, then all the sudden it seemed like it blew somethin loose, i dont know what but it opened up and took off, rode it for bout an hour after that it ran great. Thanks for all the help guys
maybe your carb had something in it still or your air filter. glad to hear its running though mine got impounded lol
