Idle issue

[smokey1014]

My 2006 blaster wont idle unless i rev it up then as soon as i let go of the throttle it shuts off help please

 

[jus_me]

My 2006 blaster wont idle unless i rev it up then as soon as i let go of the throttle it shuts off help please

Do you still have the tors or no? Have you cleaned carb? did this just start happening? Sounds like idle adjustment or something got stuck in pilot jet. Also check float height.

 

[smokey1014]

Do you still have the tors or no? Have you cleaned carb? did this just start happening? Sounds like idle adjustment or something got stuck in pilot jet. Also check float height.

I. Recently just bough it and the guy said he bored it over and rejet. It. It has a fmf exhaust on it. Yes this just started happening i cleaned the carb and i still have the tors on it .

 

[smokey1014]

Im thinking about taking the tors off would that help?

 

[Blaaster]

Have you tried to adjust the idle?

If so will the knob on the top of the TORS raise the rpm?

 

[smokey1014]

Yes it did i went ahead and took the tors off . now what?

 

[Larry's Shee]

Two identical threads, not good
http://www.blasterforum.com/threads/idle-issues.60390/

 

[smokey1014]

Sorry im.new to.this site

 

[Awk08]

if the tors block is still on top of carb ?, try just turning the idle up a little with the screw on top of the TORS unit, remove seat, lift rubber flap and look down under the fuel tank, the big screw is the idel adjust, clockwise to increase the rpm's

clean the carb
http://www.blasterforum.com/threads/how-to-clean-your-carbureutor.254/

check/set float height
http://www.blasterforum.com/threads/float-heights-and-how-to-adjust-them.50565/

set airscrew
http://www.blasterforum.com/threads/adjusting-your-airscrew-pilot-jet.51060/


btw....threads merged into one