I need some engine help...please??

[ron89]

http://www.motosport.com/atv/produc...~272^categoryID~383^categoryName~Top+End+Kits

could i get away with buying this kit, and cleaning my carb, and getting a set of v-force reeds?

yea that will work .. make sure you get a gasket kit and replace the top end gaskets when you rebuild her .. make sure you get the cyli honed out ..

 

[HunterDan]

when i get the cylinder honed, i can still use this kit correct? its not like ill need a big bore kit right?

 

[ron89]

when i get the cylinder honed, i can still use this kit correct? its not like ill need a big bore kit right?

yea you are just deglazin the cylinder so the new rings can seat properly.. yea no need to buy a bigger piston ..

 

[HunterDan]

thank you very much sir!

any tips on exhaust? im thinking the pro circuit 304 silencer, then when i save up more money, a pro circuit pipe.

any other suggestions?

 

[ron89]

thank you very much sir!

any tips on exhaust? im thinking the pro circuit 304 silencer, then when i save up more money, a pro circuit pipe.

any other suggestions?

no prob man .. i wouldnt get a silencer then a pipe, i would save up and get a whole pipe, cause a silencer wont do any thing but make it loader ..

 

[hickskateboarder]

f7/trinity/power pros -different names but same pipe, supposedly one of the best pipes.

kennedy_power teamed up with shearer to make a pipe, he's got a deal on porting and the pipe for $425 it think. he could do the honing and get u set up with a new piston and rings if you want too, just pm him. if not, that kit should work, you'll still want to hone your cylinder tho.

what you get depends on your budget and how fast you want to go. if your stock reeds aren't cracked or warped, you don't need to get new ones. if they are, you may as well upgrade! you can get boysen carbon fiber reeds off ebay for probably cheaper than a dealer would want for oem reeds. or you could dish out the money and get the v force III's. they are supposed to be the best.

 

[HunterDan]

thanks man. i dont want to spend too much. maybe 5-6 hundred

ill pm him thanks!

 

[militaryblaster]

or you could dish out the money and get the v force III's. they are supposed to be the best.

I thought I had read a thread on here by Kennedy or Floteck that said V-Force 2`s are better for Blasters than VF3`s.

 

[hickskateboarder]

hmm... dont' remember seeing anything like that. think you could find it and post a link?