hub a-arm swingarm painting

[XxblasterboyxX]

im gonna paint my hubs while waiting ofr new wheels but will the paint chip off easy if i paint the swinger and the a-arms?

 

[Blue Bowtie]

It shouldn't as long as you prep it correctly.

 

[callmej75]

Best way to prep cast is sandblast it because it's extremely hard to sand. If you can get them sandblasted and clean them with alcohol, prime, then paint it should last a little longer than just throwing some paint on them. Powder coat them is the best method of course..

 

[XxblasterboyxX]

Best way to prep cast is sandblast it because it's extremely hard to sand. If you can get them sandblasted and clean them with alcohol, prime, then paint it should last a little longer than just throwing some paint on them. Powder coat them is the best method of course..

yea im gonn oweder coat my frame red this winter but im gonna prime it then paint maybe sand it

 

[brandoz28]

its a quad....paint's gonna chip, powder will even chip/wear if you ride it hard

 

[Blue Bowtie]

Thanks for the rep blasterboy.

 

[XxblasterboyxX]

Thanks for the rep blasterboy.

u welcome anyone who hunts whitetail deer gets deserves some ( i guess u hunt by looking at ur avatar)

 

[XxblasterboyxX]

painted my hubs today heres wat it looks like

do yaa think it looks good

 

[royalt67]

Not bad for rattle-can, but you are going to wish you taped off the studs.

 

[brandoz28]

Not bad for rattle-can, but you are going to wish you taped off the studs.

werd

i always use the 96 cent spray cans from wally world....easy to touch up