how can i fix my motor case?

[TeamCarr]

i just got a 92 blaster today for a couple bones and it has a crack in the left side motor casing. take a look at the pick and tell me if its weldable? it looks like they tried to apoxy it but it didnt hold. could i jb weld it somehow or do i need to take it to a shop and have them weld it shut?

also when i took the exhaust pipe off oil poured out and there was motor oil on the top of the piston. i read somewhere that there is a little gasket behind the main drive gear but cant find the thread anymore. does anyone know what the gasket is called so i can order it?

 

[brandoz28]

having it welded up by a shop will be the best option, but guys on here have good luck with jb weld or qwik steel

 

[Little-J]

ask what a shop thinks, if they go all "ooooh... aaaaah.." then maybe you should try some sort of epoxy putty.. it is weldable, you just need to find the right place to do it..

 

[xjma]

That most likely happened from a loose chain jumping the front sprocket. I used to have that issue on my LT 230 back in the day before O-ring chains. Chances are the only thing that will fix it is a new side case. Sorry.

 

[DUALSTROKE]

Jb weld or quicksteel.Sand the are really good and make sure no oil is on it and it will work.You may have to put some thin aluminum over the hole first to keep it from falling in.A good welder could fix it up nicely also.

 

[blasterfreek30]

bummer bro, ill let u know when we get some cases savers made up, it prolly would have stopped that