home made clutch tool

[harley1-5]

I need some opinions.I need to hold the inner clutch hub on my banshee still to pull the nut.I want to weld a piece of bar stock to 1 of the old clutch steels and use that.Will it work?

 

[blasterfied]

If you took at least 4 steel plates and then weld (tack) them to 1/8" x 1" flat stock, I could see that working. Bend the stock around the plates at least half the diameter, weld (tack) in multiple locations for strength and using a material thicker for a handle.

 

[MrTwoJay]

Well, if you have a fukt clutch lying around, bolt a inner and outer together a coin in between the gears, and its loose!

I never had a spare cluch, so I made a tool, will go take a pic nwnw and post it here for you. Its something worth having...
The other tools are for a gy6 variator and clutch removal (also fits on blaster flywheel)
Excuse the condition, as its taken years of abuse, hehe

 

[MrTwoJay]

Flywheel puller, for stripped center threads.

Oil seal removal tool.

Clutch center holding tool.

Flywheel/holding tool.

 

[Awk08]

I made a set for my buddy..... a steel and fiber with a couple small 4mm bolts/nuts thru them, works like a champ.
placed some small wood blocks in behind them to protect the basket and drilled the holes with the 2 plates in place to insure alignment.

he couldn't figure out how my tusk clutch tool worked
so i took him a no brainer

 

[harley1-5]

thanks guys awk im gonna try yours

 

[harley1-5]

Awk08 is awesome his idea worked.Thk you awk shee is 1 step closer

 

[Awk08]

Awk08 is awesome his idea worked.Thk you awk shee is 1 step closer

now we just gotta get your cell phone camera and photog skills 1 step closer....you know we like pics !

 

[harley1-5]

ill try to remember just posted some the shee thread