Help with electrical

[Josh_bodine]

So I tore my banshee down to the frame, labeled every nut and bolt ll that good stuff. I started for assembling on the new painted frame, swingarm, and stuff and now the motor is in an all my electricals are on but I have no spark.. I've checked EVERY connector they are all tight. I checked my ground by my voltage reluglator and sanded down on the frame where the fresh paint is.. The banshee ran perfect 1st kick before tear down. What's a check list that I should check for? I replaced the stator a month ago but I don't see how that could be the issue because it ran perfect before it was torn down. It's great looking but won't run any advice is appreciated.

 

[Awk08]

you need to find the other ground and sand that down too, on our blasters it's on a coil bolt

you can download the manual here:
http://www.blasterforum.com/threads/yamaha-banshee-manual-pdf.44882/

 

[Josh_bodine]

I sanded down where the voltage regulator is, that ground. Also I sanded where the coil bolts onto the frame..

 

[Josh_bodine]

Where is all the grounds located on a banshee?