help trying to tighten up the slack in my chain

[dbull09]

any help would be appriciated thanks

 

[blasterdemon7]

Lust loosen the carrier bolts and use the adjusters to tighten it.

 

[blasterdemon7]

Here a bid I did real quick one day. Not very good but will be some help.

 

[piezzi]

yeah....loosen both carrier bolts (i think they're 17mil) and then screw in the two adjusters EVENLY (i think they're 10mil)......by doing a full turn on one adjuster, then a full turn on the other. Repeat until you get the slack out and then tighten the carrier bolts back down.

 

[Blaaster]

You need 30mm - 40mm slack on the chain with the rider sitting on the bike!

 

[dbull09]

thanks guys i just got the blaster a couple weeks ago and havent owned a four wheeler in awhile i appriciate the help

 

[05blaster3]

i think there is 4 bolts on the back you have to tighten (correct me of im wrong)
and they have to be even!!

 

[Drk_rider]

i think there is 4 bolts on the back you have to tighten (correct me of im wrong)
and they have to be even!!

2 carrier bolts and 2 chain adjuster bolts wit 2 lock nuts. quick and easy.

 

[blasterdemon7]

Yuuuup . The vid I posted was just a quick one that I ran outside and did to help another member. I'll redo it with better details.